Printed T Shirt Wholesale Supplier-Bangalore Cotton T Shirt Exporter-Blank t shirt Manufacturer India-Golf T Shirt Manufacturer Bangalore
Factors affecting the durability of personalized clothing:
- Good construction of the dress.
- Quality of fabric used
- Long life of axes and elements
It is essential to avoid personalized clothing that looks cheap after use and after washing, as it may deteriorate and the mold may crack, discolorate or peel off. Here’s how to check this out as an expert:
Step 1: Inspect the construction of the garment:
For a good quality t-shirt, we need to use good textiles, but it is equally important to know how it is made. After all, if a building is built badly it does not matter how good the materials it will still fall on. There are many types of knits and stitches that will give the t-shirt a firm and durable look.
Inspect the seams and edges first to see if any threads are missing.
Sewing is the muscles of a garment; They hold it all together. Since manufacturers will always pay more attention to the outside of the t-shirt, the easiest way to find out if a garment is well done is to turn it inside-out. Stitched evenly? Is it flat? Are there any loose threads?
Also, check how many stitches it has. As a rule ; The higher the number, the better. That means more time was spent attaching the dress together.
Like sewing, hems indicate how carefully the garment was made. When it comes to T-shirts you should pay particular attention to the collar, sleeves and bottom edge. You can see the obvious signs of poor production there.
Step 2: How to check the quality of a fabric:
The easiest test is to touch it. A good quality T-shirt will never feel like plastic or chunky. If the fabric feels soft and firm at the same time, it is likely to be a good quality material. However, ‘softness’ can be easily deceived, so you should keep an eye on the following details:
Check the density of the fabric; Hold the garment against a light source and see how transparent it is. The more transparency there is, the less dense the fabric. As we mentioned above you should look for soft but firm fabrics.
Squeeze a piece of clothing tightly in your hand and then release it. If it maintains a lot of wrinkles, it is of poor quality and if there are no wrinkles, it may be synthetic. Ideally, you will look for something between these two extremes.
Also, by measuring the length of the thread, you can usually determine the quality of the fabric. The longer the fiber, the better quality is considered. Simply put, longer strands make it easier to spin the material into a thin thread. That’s why it can be put together, it will be durable and smooth. Again, if it is not compressed, it is evidence that long fiber has been used.
Since softness is another attribute associated with good quality t-shirts, there are a lot of cheaters. Usually, T-shirts are coated with a chemical (mostly starch) that softens the material to the touch, but it is not permanent. This is why many street and souvenir T-shirts start to feel ‘rough’ after a couple of washes.
Step 3: How to tell if a printed design is cracking or peeling.
Whether using techniques such as screen printing, DDG or customization with transfers – cracks in print or modified materials are the most common type of distortion. However, if the processes are done correctly, it should not happen. Since new clothes always look perfect, how to check for cracks in the artwork:
To determine if the mold has healed properly, stretch the area where the mold is located. You should see the ink stretching with the cloth. If cracks occur, it is not done properly and will wash off quickly.
Be sure to inspect the corners and cracks and peels throughout the design. Screen printing amateurs often struggle to adjust the time, temperature, pressure or skin to each technique during the printing process.
Touch the axis to check how much ink and coated layers were applied. We are looking for solid mold (some thickness), but not too much. Whether the garment is DDG or printed on the screen, the greater the thickness the more ink can be printed or the more fixation can be applied, which can lead to a higher probability of cracking.
In the case of transfer printing, the use of cheaper materials will create cracks over time. Touching, stretching and crushing the print will give clues about the quality of the transmission.
Another thing that can happen in transfer customization is that the artwork will peel off and fall off the garment. This is related to how well it adheres to the fabric due to pre-pressing on the garment before removing or removing the unwanted moisture in the fabric. Carefully observe the boundaries of the altered area and see if any peeling is seen. To be sure, run your fingers and nails across the boundaries of the transmission. If you think you can remove it, it will peel off automatically after use and after rinsing.
Step 4: Find out if it is discolored:
Properly washed, it will withstand a great deal of adverse conditions and will not lose its color throughout the life of the garment. Here’s how you can tell:
Has it already lost color?
Believe it or not, cheap printing can create stains and cause color loss even if the artwork looks good at first glance.
Touch the mold or transfer axes and rub at your fingertips. You will see if your fingers are stained. If you notice even the slightest drop of it, it is a clear indication that this dress is printed to a very low standard.
Another way to find out is whether other parts of the T shirt are dirty or stained with colors attached throughout the garment. If this happens, be careful when using clothing and rinse it again as it can damage and dye other clothing.
Does the color change after washing?
Once the printing process is complete it is not easy to find because it depends on the quality of the ink and the curing process. So when the dress comes into your hands it will not be very noticeable.
As a general rule, T-shirts and dresses printed on the screen do not lose the artistic colors or vibrancy. But when it comes to DDG printing, the odds of this happening are high. New DDG machines and technologies prevent discoloration. Until recently, you could simply assume that DTG prints would fade over time and after washing.
The only color change test you can do for DTG printed products:
Touch the prints, if they are too soft, it means that no matching or too little coated layers have been applied. As a result, after a few washes, it turns pale – resembling an antique look.
Nevertheless, a tactile sense of balance requires a balance between tenderness and some courage. If the prints feel firm and soft at the same time, it should be safe.
